Description
These recone kits were built for the American Bass 12″ HD series that use the claw style frame. This style of subwoofer was manufactured in 2010-2011. We are including a photo of one of them in the photo gallery. These would also work for any other subwoofer using the same style frame with a similar motor gap size
These are being sold as is, no warranty.
These were built for use with low-power, roughly 800-1000 Watts RMS. These use a single layer spider and would be best in a small ported enclosure with about 1.5-1.75 ft.³ of internal airspace. Recommend tuning is 31hz.
Cone Size: 12″
Set up for: Claw Style frame with 20-25 mm top plate thickness. No spacers between motor and frame.
Distance from Spider Landing to Center of Coil: 58 mm
Coil Specs : 76 mm ID x 81.5 mm OD x 43 mm Winding Length
Coil Material: Copper Round
Coil Impedance: Dual 2 ohms (1.5 ohms DC each coil)
Spiders: (1) 8″ Stiff Progressive Roll
Leadwire: Single Sewn Heavy Duty
Connection: None
Cone: 12″ HD Pulp w/ Wide Roll Surround
Dustcap: Not Included – Purchase Separately
#5 6