Description
This dustcap covers the entire cone of the subwoofer for a sleek 1-piece look.
This dustcap is available for our all of the 12″ cones available in our shop.
Dustcap Material: Polypropylene
Dustcap Color: Black
Glue with: RUBBER Adhesive. DO NOT use CA glue to install this product.
Measurements:
Outer Diameter: 8.25″ for Medium or Wide, 7.125″ for Tall, or 6.875″ for Mega roll surround
Height: 1.0″
This dustcap can be used to cover over the broken face of an MTX 9500 / MTX 9512 12″ subwoofer. This dustcap has the same outer dimension and when glued over the top of the original dustcap, will rest directly on the center of the old letters. If your old cone is shattered or broken, you can glue this directly over the top of it for a fresh new look without rebuilding the subwoofer. When purchasing this for the MTX 9500subwoofer, choose the option for the Wide roll surround and it will fit properly.
This dustcap can be used to cover over the broken face of an Alpine Type-R 12″ SWR-1222D, SWR1242D, SWR-12D2 or SWR-12D4 subwoofer. This dustcap has the same outer dimension and when glued over the top of the original dustcap, will rest directly on top of the original cone. If your old cone is shattered or broken, you can glue this directly over the top of it for a fresh new look without rebuilding the subwoofer. When purchasing this for the Type-R subwoofer, choose the option for the Wide roll surround and it will fit properly.
NOTE: This product does NOT work with the JL W7 cone. If you need a dustcap to fit the W7 series, we do make them and they can be found here – JL Audio W7 dustcap
